Will Mayflash Gamecube Adapter Work For Mac With Usb Extension
- Will Mayflash Gamecube Adapter Work For Mac With Usb Extension Cord
- Will Mayflash Gamecube Adapter Work For Mac With Usb Extension Tool
Playing one of our free online games? Just download, install and play! Ww real com.
As an Amazon Associate I earn from qualifying purchases.Driver should allow Dolphin to directly recognize the Mayflash Wii U/PC adapter and allow all 4 ports to be used without the need for configuring it to the USB. As for activating the root user and a few unsaid thing in the README, you use Terminal to open/run files and here's how you enable root. Although you can easily use the GameCube controllers via USB adapter with the switch in dock mode, the GameCube controller has a few buttons and features less than the Switch Pro controller or the Joy-Cons. For example, “Mario Kart 8 Deluxe” and “Mario Tennis Aces” are easy to play.
- Mayflash 2 Port for GameCube GC Controller Adapter Converter for Wii U for Switch for Mac OS for Windows PC USB. MayFlash for Sega DC for Dreamcast Controller Adapter to for Windows PC USB/Mac Descriptions. BUKIM Extension cable For SEGA Dreamcast Controller for DC gamepad grip handle joystick.
- Gamers have found a way to make the Wii U GameCube Controller adapter work on PCs. When Nintendo released Super Smash Bros. For Wii U last month, the publisher also released a special USB dongle for its home console that connects four GameCube controllers to the new system.
- Mayflash Adapter for GameCube Controller to Wii U & PC (2 Ports) 4.5 out of 5 stars (22) 22 product ratings - Mayflash Adapter for GameCube Controller to Wii U & PC (2 Ports).
Supports the built-in Vibration Feedback with no delays by plugging the two USB ports of the adapter into your Wii U system or PC USB connector ports. Compatible with Windows XP, Vista, Windows 7,Windows 8,32 bit and 64 bit and Mac OS under the PC mode. .Firmware V05 for WINDOWS and LINUX, V06 for MAC (but upgrade in WINDOWS) 1. The GameCube Controller Adapter allows you to connect up to four GameCube controllers (or wireless GameCube controllers) to a Wii U system and PC USB 2. With two GameCube Controller Adapters, up to eight GameCube controllers can be used at the same time 3. The GameCube Controller Adapter allows you to connect up to four GameCube controllers (or wireless GameCube controllers) to a Wii U system and PC USB2. With two GameCube Controller Adapters, up to eight GameCube controllers can be used at the same time 3. Switch to “Wii U” or “PC” mode by using the switch located on the side 4.
1. Y Team
#adWii U and PC USB with 4 Ports, Plug & Play, Switch Gamecube Controller Adapter, No Drivers Needed, Super Smash Bros Gamecube Adapter for Nintendo Switch
#adY Team#ad - Surely the 5. Beyond most gamecube controller adapter. There is no '+' '-' map buttons, so please note some game's function may not work. 0 version. Allows you to connect up to eight gc controllers use at the same timeNeed two adapters.The gamecube controller adapter is your best choice to play super Smash Bros on nintendo switch, just switch the button 'Wii u/PC' located on the side and no driver need, wii u. Updated version. Support nintendo switch, wii u, pc usb and mac os with the GC controller or wireless GC controllers. If you have any concerns or questions about this gamecube controller adapter.
0 verysion is absolutely ok. So please just rest assure for the product quality. The newest chip design. Please feel free to contact us, we will provide satisfied solution. But the system need up to 4. Japanese expert R&D. The switch gamecube controller adapter can be used for nintendo switch. Very eays to use, no lay and interference with the built-in Vibration Feedback.
| Brand | Y Team#ad |
| Manufacturer | Y Team#ad |
| Height | 4.92 Inches |
| Length | 1.77 Inches |
| Width | 3.94 Inches |
| Part Number | WH-046 |
| Model | WH-046 |
| Warranty | No |
2. EVORETRO
#ad4 Pack Gamecube Controller Bundle, with 4 Extension Cords and a 4-Port Adapter for/Switch/PC by EVORETRO
#adEVORETRO#ad - The ultimate gamecube bundle: this set includes 4 extension cords, a 4-port adapter, and 4 sturdy GameCube controller in 4 different colors Black/Silver/Purple/Crystal Green; they give you the same shape and button layout as original Nintendo’s pro controller for accessibility and extended gameplay comfort.Adapter can connect up to 4 controllers at the same time with no lags or delays, letting you have an awesome time with three of your friends. The multi-port capability: the adapter has 4 docks that can connect up to 4 controllers at the same time with no lags or delays, letting you have an awesome time with three of your friends. Our customers are first on our priority list and we simply provide you the best product and service. Guaranteed: we ensure 100% customer satisfaction by providing the highest quality in the market. As well as every game on both versions of the virtual console which makes navigating a lot easier.
Multi-platform support: free yourself from limitations with these accessories that can support PC, and Nintendo Switch which also has a hassle free switching from PC mode to GameCube mode by just toggling a selector on the side of the adaptor, giving you smooth transitions all the time. Superior compatibility: this pro controller works with all gamecube and Nintendo Switch games so you can definitely ace your Super Smash Bros. Mario kart, Splatoon, Zelda, etc.
Will Mayflash Gamecube Adapter Work For Mac With Usb Extension Free
| Brand | EVORETRO#ad |
| Manufacturer | EVORETRO#ad |
| Part Number | 3760265294855 |
More information#ad
3. May Flash
#adMayflash GameCube Controller Adapter for Wii U PC USB and Switch Two ports
#adMay Flash#ad - Supports the built-in vibration feedback with no delays. The gamecube controller adapter allows you to connect up to two GameCube controllers or wireless GameCube controllers to a Wii u system, PC USB, Switch. Compatible: windows xp, vista, windows 8, windows 7, 32 bit and 64 bit and Mac OS under the PC mode. Supports the GC/Wii emulator dolphin. Switch mode by using the switch located on the side.| Brand | May Flash#ad |
| Manufacturer | MAYFLASH#ad |
| Height | 1 Inches |
| Length | 5.75 Inches |
| Weight | 0.25 Pounds |
| Width | 2.3 Inches |
| Part Number | W013 |
| Model | W013 |
4. YCCSKY
#adGamecube NGC Controller Adapter for Wii U Nintendo Switch and PC USB 4 Port Plug and Play No Drive Need, YCCSKY Gamecube Controller Adapter
#adYCCSKY#ad - 8 players need two adapters. This adapter allows you to connect up to 4 GameCube controllers to play games at the same time. Ultimate games. Since the gamecube controller lacks some buttons corresponding to the Switch controller such as '+' & '-', some function may not achieve.Just need to simply move the button to switch games between Nintendo Switch / Wii U & PC. Adopting high-quality chip to provide a better game experience. 4 controller ports fully compatible with super smash Bros. Plug and play easy to use and no drivers needed. Customer support gamecube controller adapter, with YCCSKY friendly 24 hours customer service. Wide compatibility support nintendo switch, wii u, pc and mac oS with the GC controller or Wavebird controller. Kindly note please update switch system beyond 4. 0 if you want to play games on Switch. Makes it even easier to play action games.
| Brand | YCCSKY#ad |
| Manufacturer | YCCSKY#ad |
More information#ad
5. Kahool
#adWorks with Gamecube NGC Controller, Kahool Wireless Bluetooth Adapter for Nintendo Switch & PC Windows, NES/SNES/Wii Classic Controller & Other Same Wii Port Controllers
#adKahool#ad - It has a built in toggle that allows you to connect to your Nintendo Switch and X-input capable software on Windows 7, NES, XP. Classic controllers are any controllers that are made to be plugged into a Wii mote or NES/SNES Classic Edition. 2 side ports wireless adapter - one side is for a gamecube controller only the old gamecube controller, but not the new smash bros ultimate edition game cube controllers, the other side is for a Classic controller.That includes third party Classic controllers that are shaped like Wii controllers. Home/snapshot function switch use only- when using on nintendo switch console versin 4. 0 or above, home/ snapshOT functions are available. B, only the WII port controller could work. Support multiple controllers with no lag -this wireless bluetooth adapter enables you to play your switch with your original wired controllers like Game Cube, 8, 10, SNES, SFC Classic Edition and Wii Classic.
Please note - a, ngc & wii ports could not use simultaneously, when connected both of the 2 ports with controllers, 2 x AA batteries are required but NOT included. Press the home button to return to the main page. Press the button on the wireless converter for screenshot and long press for recording videos. C, but only for the gameube controller, this bluetooth adapter supports rumble, Classic controllers have no rumble.
| Brand | Kahool#ad |
| Manufacturer | Kahool#ad |
6. Airmate
#adGamecube Controller Adapter Super Smash Bros Gamecube Adapter with Turbo Home Button for Nintendo Switch, Wii U and PC USB
#adAirmate#ad - Switching the mode by using the button on the back of the converter. Warranty & support 100% satisfaction guaranteed Warranty! Try it out today and enjoy your gaming time as long as you want. Turbo' and 'home' buttons make up for the lack of these buttons on the GameCube controller, you will be able to enter the game character faster to experience the passion of the games.Play super smash bros together our switch gamecube controller adapter support up to 4 GameCube controllers to play games simultaneously. Latest version no driver need and easy to use. Support vibration provide you a great experience with vibration feature. More fun to play super Smash Bros on Wii U or Switch.
8 players need two gamecube adapters. Simply connect both usb wires to your Switch, Wii U console to enjoy playing with Vibration Feedback without any delays. If you’re not fully satisfied just contact us. Wide compatibility this gamecube adapter is compatible with the normal gamecube controller and wavebird wireless controller to play games on switch, Wii U and PC.
| Brand | Airmate#ad |
| Manufacturer | Airmate#ad |
| Height | 1.26 Inches |
| Length | 4.72 Inches |
| Width | 2.36 Inches |
| Model | YCC-W047 |
More information#ad
7. Old Skool
#adWii U, 4 Port, and PC USB, Old Skool GameCube Controller Adapter for Switch
#adOld Skool#ad - 4 gamecube Controller Ports. Compatible with Wii U and PC. Tournament Ready. Compatible with Nintendo Switch.| Brand | Old Skool#ad |
| Manufacturer | Old Skool#ad |
| Height | 4.75 Inches |
| Length | 1.5 Inches |
| Weight | 0.33 Pounds |
| Width | 5 Inches |
| Part Number | OS-7111 |
| Model | OS-7111 |
8. ZQQ
#adNo Drivers Needed Updated Version, GameCube Controller Adapter for Switch, Super Smash Bros Switch GameCube Adapter for Wii U and PC USB with 4 Port. Plug and Play
#adZQQ#ad - By using two adapters, you can connect up to 8 controllers. Gamecube adapter for switch - this gamecube controller adapter is compatible with Switch systems beyond 4. 0 Surely the 5. 0 version is absolutely ok. It can also be used to connect GameCube Controllers to your PC.
Support nintendo switch, pc usb and Mac OS with the GC controller or wireless GC controllers. Easy to use - newest chip design gamecube controller adapter no lag and no driver need. Just switch the button 'Wii u/PC' located on the side. If there is any concern or question about this gamecube controller adapter please feel free to contact us. Warranty policy - 12 months warranty and 45 days money-back guarantee or replacement. Vibration feedback - interference with the built-in vibration feature provide you a great experience. Your best choice for Super Smash Bros. Updated version - this gamecube controller adapter for switch lets you connect 4 GameCube Controllers make more fun to play Super Smash Bros on Wii u or Switch. There is no '+' '-' map buttons, so please note some game's function may not work. Simply connect both usb wires to your Switch, Wii U, Wii U or PC USB port, connect the controllers. Just plug the gray cable to Switch or Wii u console.
| Brand | ZQQ#ad |
| Manufacturer | ZQ international#ad |
| Height | 1.3 Inches |
| Length | 4.7 Inches |
| Width | 2.2 Inches |
| Part Number | ZQGCA-01 |
More information#ad
Will Mayflash Gamecube Adapter Work For Mac With Usb Extension Cable
9. Kabalo
#adTRVL FIELDER Gamecube Adapter 4 Port Black Gamecube Gamecube Adapter for Switch Controller Adapter Compatible with Wii U -Plug & Play, No Drivers Needed
#ad
Kabalo#ad - Third party gamecube controller adapter converter for using GameCube controllers on the Nintendo Wii U. Comaptible with any controller using a GameCube connection. Usb connection for the Wii U console or PC switchable - 1m lead included. Play a variety of games with your classic GC or WaveBird controller! Compatible with Super Smash Bros. Easy to set up and use.| Brand | Kabalo#ad |
| Manufacturer | Kabalo#ad |
| Part Number | A |
| Model | A |
10. Cloudream
#adPC, Super Smash Bros Ultimate Nintendo Switch Controller Black+White, Gamecube Controller, 2 Pack Classic Wired Compatible with Nintendo Gamecube Controller for Wii U, Switch,WII
#adCloudream#ad - Retro video game feel! want to introduce your kids to classic era gaming? Or relive the times you and your buddies would play games? This is your best choice. The gamecube controller Improve by USA expert.Please note:this is not oem or official item. Some platforms may need the gamecube adapter. Updated version. Iqiku direct would provide a great customer experience with a quality product. Smash is comming on dec 2018. No lag and no driver need. You can use this controller to play the newest Smash Bros on Switch. The gamecube adapter is needed.
Great news. Play with your super smash bros or other games without worry. Any concerns with the controller, feel free to email us via 'Contact Seller' or click Sold by 'pdobq direct', then click 'Ask a question', we will try our best to help you until you are satisfied. Classics gamecube controller, Compatible with nintendo gamecube/wii u/pc/switch/wii.
| Brand | Cloudream#ad |
| Manufacturer | Cloudream#ad |
| Part Number | NA |
| Model | NA |
More information#ad
How to Upgrade?1. Download the software from http://www.mayflash.com/Support/Download/ and install it on your Windows system.
2. Double click on the updater and leave the updater window open on your screen.
3. Press and hold the button on the side of the adapter, and connect the USB from your adapter into any spare port on your PC.
4. As soon as the driver window indicates under “Device” that the adapter has been recognized, you may release the button.
5. Select “Update”.
6. Do not disconnect the device until you are informed that the updated was completed successfully.
V1.29
1. Compatible with SNK NEOGEO Arcade Stick PRO
- NEOGEO Console Mode Quick Start
1)Turn on your NEOGEO Arcade Stick Pro and connect it to your TV.
2)Switch to the Console Mode via using the switch on the side of the Arcade Stick
3)Connect your Magic NS to your NEOGEO Arcade Stick Pro via a Type-C cable and setup to Yellow Mode for Magic-NS.
4)Connect your Controller with Magic NS via Bluetooth or a USB cable.
5)The Bluetooth has been paired if the LED indictor lights up and your controller is ready to use now.
- NEOGEO Joystick Mode Quick Start
1）Switch the NEOGEO Arcade Stick pro to Joystick Mode （Mode 1）
2)Connect your NEOGEO Arcade Stick Pro to your Magic NS.
3)Connect your Magic NS to your Nintendo Switch.
4)You are ready to play now.
2. Fix the bug that the Xbox One Controller updated to V4.8.1923.0 can't work.
V1.28
1.Supports Xbox Elite Wireless Controller Series 2
Xbox Elite Wireless Controller Series 2 Start Up
① Turn on your Nintendo Switch, PS3, NEOGEO mini, or PS Classic system, and connect the system to your TV.
② Connect the Magic NS into any spare USB port on your system.
③ To switch the modes, press and hold the button on the side of the adapter for 3-5 seconds. The LED indicator blinks slowly.
④ Turn on your Xbox Elite 2 controller
⑤ To sync your Xbox Elite 2 controller and the adapter, press the Button on the side of the adapter, and then press the SYNC button on your controller. The LED indicator blinks quickly.
⑥ The adapter and your controller has been connected if the LED indicator lights up. And your controller is now ready to use.
Special Remarks:
- It may take a longer time to connect your Xbox Elite 2 and Magic NS adapter. And the connection may be disconnected shortly (The lights on the controller and the adapter flash) and then connect again during the Bluetooth pairing process. Please wait patiently until the LED indicators on the controller and the adapter stop flashing.
- If you want to disconnect the controller and the adapter, please press and hold the HOME button on your controller to shut off the power.
- If the Bluetooth connection failed, you can repeat the above steps to try again. Please make sure you pull out the adapter and plug it to the system again, and restart your controller before a new connection.
2.Adjust the Dead Zone
① Press and hold the two buttons START and D-Pad Left (For the left stick) or D-Pad Right (For the right stick). The LED indicator on the adapter flash.
② To increase or decrease the dead zone, press the D-Pad “Up” or “Down”.
③ As soon as you get the right dead zone value, you may release the button “START” to quit the Dead Zone Adjusting.
④ There are 7 levels of the Dead Zone Value.
Dead Zone Level 1: 0%
Dead Zone Level 2: 2.5%
Dead Zone Level 3: 5%
Dead Zone Level 4: 7.5%
Dead Zone Level 5: 10%
Dead Zone Level 6: 12.5%
Dead Zone Level 7: 15%
The default one is the Level 3.
You can know the Dead Zone Level by the times of the LED indicator flashing on the adapter during the adjusting process. For example, the LED indicator flashes 3 times then stop flashing when the Dead Zone Level is Level 3.
3.Compatible with ASTRO Gaming C40 TR Controller PlayStation 4 and PlayStation 4 SCUF Vantage 2 controller by a USB cable (Wired connection).
4.Add the analog input to the Joy-Cons.
5.Supports SEGA MEGA DRIVE and SEGA Genesis Mini entertainment system. The LED indicator is White.
6.Supports the USB Control Pads of SEGA MEGA DRIVE and SEGA Genesis Mini
V1.26:
- Add a new mode to support PS Classic. LED Indicator in Cyan: PS Classic mode To switch the modes, press and hold the button on the side of the adapter for 3-5 seconds. The LED indicator blinks slowly in cyan for the PS Classic system mode.
- Compatible with PS Classic Controller.
- Compatible with Nintendo Switch Taiko Drum
- Compatible with PS4 Taiko Drum
V1.25:
Supports NEOGEO mini; Fix Xbox 360 Controller buttons reverse issue
LED Indicator in Yellow: NEOGEO mini mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired
Switch Pro mode (the LED indicator is purple)
To make sure the system can identify the adapter easily, please turn on the “Pro Controller Wired Communication” of the Nintendo Switch system once you switch the adapter to the Switch Pro mode (the LED indicator is purple).
Tips: System Settings - Controllers and Sensors - Pro Controller Wired Communication – ON.
Upgrade Contents
V1.23
1. LED Indicator in Green: PC Xinput System mode
- The controller buttons AB and XY（×○ and □△) can be switched (remapped) by pressing and holding the START + A（START + ×）or START + B（START + ○）for 3 seconds.
- This function is compatible with all controllers.
2. LED Indicator in Red: Nintendo Switch System mode
LED Indicator in Purple: Switch Pro mode
- The buttons AB and XY can be switched (remapped) by pressing and holding START + A/B for 3 seconds.
- This function is compatible with all controllers.
3. Adjust the vibration intensityQuick Start:
(1) Pressing and holding the two buttons R1/RB and R3 for 3-5 seconds until the controller keeps rumbling.
(Note: You need to keep holding these two buttons until you finish the whole process)
(2) To adjust the vibration intensity, press the Directional Pad 'Up' or 'Down'.
(3) To quit the vibration adjusting, release any button of R1/RB or R3 once you have got your preferred vibration intensity.
(4) There are 7 levels of the vibration intensity on the Switch Pro mode (LED Purple),0% 25% 37.5% 50% 62.5% 75% 100%. The default vibration intensity is 50%.
(5) There are 7 levels of the vibration intensity on the other modes,50% 62.5% 75% 87.5% 100% 125% 150%. The default one is 100%
(Note: No vibration on the Nintendo Switch System mode/LED in red. The vibration is compatible with PS3 Game Console on the PS3 or PC Dinput System mode/LED in blue)
V1.21
1. Adjust the controller vibration/rumble intensity on the Swtich Pro mode (Purple LED).
2. Compatible with the Xbox 360 wireless controller by a Xbox 360 dongle.
3. Compatible with Wii Remote by using Wiimote+Nunchuck or Wiimote+Wii Classic/Pro Controller.
4. Fix the bug that the LS and RS do not work on some third party controllers under the Switch Pro mode (Purple LED).
V1.19
1. Supports the gyroscope input from PS4 Controller (Dualshock 4) on the Switch Pro mode (LED indicator is purple).
2. Enhance the stick sensitivity of the controllers by reducing the stick deadzone.
V1.15:
1.Supports more Wii U Pro Controllers from the third party. The ones we've tested are Afterglow 085-018, HYPERKIN M07165-BK, NYKO 87161-P37, POWERA 1422653-01.
2. Fix the bug that the L3 and R3 button of some third party Wii U Pro controllers work wrongly.
3.Fix the bug that the character only moves in a slow walk when you tilt the stick diagonally on the Dinput (PS3) mode, the LED indicator is blue.
4. Fix the bug that the Left and Right stick will jump slightly when you connect the PS3 controller to the Magic-NS by a USB cable.
5. Fix the bug that sometimes the controllers channel indicators work wrongly.
V1.12:
1.Fix the bug that the controllers keep rumbling (vibrating) on some games on the Switch Pro mode (LED indicator is Purple).
2. Fix the bug that the Adapter LED Indicator (Purple) is not off when the gaming system goes into the 'Sleep' mode.
V1.11:
1.Add the Switch Pro mode, the LED indicator is purple.
2.The Switch Pro mode supports the controller vibration.
3.When you connect your PS4 controller to the Switch system through the adapter, the Touch Pad button on the PS4 controller works as the Capture button of Switch system.
Please see more details about the other controllers on the 'Buttons Table'.
4.The A-B X-Y can be switched once you connect your Xbox 360 or Xbox One/S controller to the Switch system. To switch A=B B=A X=Y Y=X, press 'START' and the button 'B' for 3 seconds; to switch A=A B=B X=X Y=Y, press 'START' and the button 'A' for 3 seconds.
MAGIC-NS Wireless Controller Adapter for NINTENDO SWITCH & PC
Wirelessly connect your PS4, PS3, Nintendo Switch Pro, Nintendo Switch Joy-Con, Wii U Pro, and Xbox One S Bluetooth controllers to your Nintendo Switch, PS3 or PC system.
The wired PS4, PS3, Nintendo Switch Pro, Xbox One, Xbox One S, Xbox 360 controllers and fight sticks, and standard wired USB controllers like Logitech rumble gamepad F510 and F310 can be connected to your Nintendo Switch, PS3 and PC system.
Plug and Play!!
Quick Start Guide
Buttons and LED Indicators
1. USB A-Male: Connect the adapter to the Nintendo Switch, PS3 or PC system.
2. USB A-Female: Connect the wired PS4, PS3, Nintendo Switch Pro, Xbox One, Xbox One S, Xbox 360 controllers and fight sticks, and standard wired USB controllers to the adapter.
3. LED Indicators
- LED Indicator in Blue: PS3 or PC Dinput System mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired
- LED Indicator in Red: Nintendo Switch System mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired
- LED Indicator in Green: PC Xinput System mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired
- LED Indicator in Purple: Switch Pro mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired
LED Indicator in Yellow: NEOGEO mini mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired
Note:
The Bluetooth is not connected yet if LED Indicators blink slowly (around 2 times/second).
4. Button on the side of the adapter: Used for the modes switch and Bluetooth pairing.
- Press the button shortly to SYNC the controllers and the adapter. The indicator blinks quickly.
- To switch the modes, press and hold the button on the side of the adapter for 3-5 seconds. The LED indicator blinks slowly in blue for the PS3 or PC Dinput system mode, the Nintendo Switch mode is red, the PC Xinput mode is green, and the Switch Pro mode is purple.
Bluetooth Controllers Set Up
1. Firstly connect the Nintendo Switch system to a TV. Just turn on your PC if you use the adapter on your PC system.
2. Connect the adapter into any spare USB port on your Nintendo Switch or PC system.
3. To switch the modes, press and hold the button on the side of the adapter for 3-5 seconds. The LED indicator blinks slowly in blue for the PS3 or PC Dinput system mode, the Nintendo Switch mode is red and the PC Xinput mode is green.
4. Turn on the Bluetooth controllers
5. To sync the Bluetooth controller and the adapter, press the Button on the side of the adapter, and then press the SYNC button on your Bluetooth controller. The LED indicator blinks quickly.
Note:
If the Bluetooth syncing failed, please connect the Bluetooth controller to the adapter using a USB cable (not included in the packaging, you can purchase it separately). As soon as the controller is identified by the system, you can disconnect the USB cable and start to SYNC it again.
6. The Bluetooth has been paired if the LED indicator lights up.
7. Your controller is now ready to use.
Wired Controllers Set UP
1. Firstly connect the Nintendo Switch system to a TV. Just turn on your PC if you use the adapter on your PC system.
2. Connect the adapter into any spare USB port on your Nintendo Switch or PC system.
3. Connect the wired controllers to the adapter.
Note: Connect the wireless PS4, PS3, Nintendo Switch Pro, Xbox One S Controller to the adapter using a USB cable (coming with your game console system or you can purchase it separately)
Xbox 360 controller must be a wired one, not a wireless controller plus a USB cable.
4. Your controller is now ready to use.
Update the Software
If you are having problems with the adapter, you can follow the below instructions to update the software.
1. Download the software from http://www.mayflash.com/Support/Download/ and install it on your Windows system.
2. Double click on the updater and leave the updater window open on your screen.
3. Connect the USB from your adapter into any spare USB port on your PC.
4. Please make sure your adapter is in the Nintendo Switch or PS3/Dinput mode (The LED indicator is in Red or Blue). If not, please switch the adapter to the Nintendo Switch or PS3/Dinput mode by pressing and holding the button located at the side of the adapter for 3-5 seconds.
5. As soon as the adapter has been recognized (LED indicator turns off), select “Update”.
6. Do not disconnect the device until you are informed that the updated was completed successfully.
Note:
1. Only one Bluetooth controller is supported for one adapter.
2. A wired USB controller and a wireless Bluetooth controller can be connected at the same time, but both of them have the same functions and can only play one game character.
3. To switch A-B, B-A, X-Y, Y-X, press and hold the button “START” and “A” for 3 seconds. To switch A-A, B-B, X-X, Y-Y, press and hold the button “START” and “B” for 3 seconds. This works only when you connect your Switch Pro, Switch Joy-Con and Wii U Pro controllers to a PC Xinput system.
4. The A-B X-Y can be switched once you connect your Xbox 360 or Xbox One/S controller to the Switch system.
To switch A=B B=A X=Y Y=X, press the button 'START' and 'B' for 3 seconds; to switch A=A B=B X=X Y=Y, press the button 'START' and 'A' for 3 seconds.
5. The Switch Pro mode supports the controller vibration.
6. When you connect your PS4 controller to the Switch system through the adapter, the Touch Pad button on the PS4 controller works as the Capture button of Switch system. Please see more details about the other controllers on the “Buttons Table”
7.If you connect up to 4 Bluetooth controllers to the adapter, you can disconnect the first controller by pressing the button located on the side of the adapter, and disconnect the second one by pressing the button, and then the third and fourth controller using the same way.
8. To use the Nintendo Joy-Con controllers, please connect the Nintendo Joy-Con (R) firstly, then connect the Joy-Con (L).
9. Logitech wireless gamepad F710 is supported. Please make sure you connect the emitter to the adapter before using.
10. To make sure the system can identify the adapter easily, please turn on the “Pro Controller Wired Communication” of the Nintendo Switch system once you switch the adapter to the Switch Pro mode (the LED indicator is purple).
Tips: System Settings - Controllers and Sensors - Pro Controller Wired Communication – ON
Will Mayflash Gamecube Adapter Work For Mac With Usb Extension Cord
Will Mayflash Gamecube Adapter Work For Mac With Usb Extension Tool
Buttons Table
Quick Start for Nintendo Switch 1.The GameCube Controller Adapter allows you to connect up to four GameCube controllers (or wireless GameCube controllers) to a Wii U system and PC USB
1. Connects your GameCube Controller to the adapter, and switch the adapter to the 'Wii U/NS' mode by using the switch located on the side.
2. Handheld Mode: Connects the adapter to your Switch by a Type-C USB cable. Please use the black cable of the adapter.
TV Mode: Connects the Nintendo Switch to your TV, then plug the USB port of your adapter to the Switch Dock.
3. Select 'Controllers', and then 'Find Controllers' on the Switch screen or TV by using your Joy-Con controllers.
4. Press 'L' or 'R', or 'A B X Y' buttons by using your GameCube Controller.
Note: The buttons will not work here, please being patient. And please DO NOT touch the left and right stick of your GameCube controller at this moment.
5. Press the button 'B' on the Joy-Con controller or select 'Back' on the screen to be back to the 'Controllers' screen. You can see a black controller icon which means your GameCube Controller is connected with the Switch system successfully.
Note: If your GameCube Controller can not be identified by the Switch System after you turn off your Switch System, or if there are any other problems, please reset your Switch and repeat the above 3rd, 4th, 5th step. Please update your Switch System to the 4.0 version.
Additional Instruction for the Firmware V05&06 (Update on 2016MAY12)
1. Wii U Mode
Please push the switch to the Wii U mode when you play the game <Super Smash Bros. Wii U>
2. PC Mode
-AutomaticIdentification:
The POKKEN TOURNAMENT Controller mode will be identified automatically when you plug the adapter into your Wii U game system. Only supports POKKEN TOURNAMENT
The PC Dinput mode will be indentified automatically once you use the adapter on your PC. Supports the GC/Wii Dolphin Emulator.
-Manual Switch
You can change the mode to POKKEN TOURNAMENT Controller mode bypressing and holding the three buttons “START+A+Z” for 3 seconds,and switch to PC Dinput mode by pressing and holding the three buttons “START+B+Z” for 3 seconds.
POKKEN TOURNAMENT Controller Mode Instruction
1. Buttons on the POKKEN TOURNAMENT Controller Mode
- POV-POV, A->A, B-> B, X->X, Y->Y, L->L, R-> R, Z->ZR, START->START
- LEFT STICK-> POV
- RIGHT STICK LEFT -> ZR, RIGHT STICK RIGHT -> ZL
2.Only one GAMECUBE Controller is supported on the POKKEN TOURNAMENT controller mode
3.No need to upgrade your adapter if you don’t play the game
2.With two GameCube Controller Adapters, up to eight GameCube controllers can be used at the same time
3.Switch to “Wii U” or “PC” mode by using the switch located on the side
4.Supports the GC/Wii Emulator Dolphin
5. Supports the built-in Vibration Feedback with no delays by plugging the two USB ports of the adapter into your Wii U system or PC USB connector ports.
6.The driver is required if you need the vibration feedback on the PC mode. Please download it from www.mayflash.com/Support/Download
7.Compatible with Windows XP, Vista, Windows 7,Windows 8,32 bit and 64 bit under the PC mode