1. Smith & Wesson Hammerless 32
2. Smith And Wesson Safety Hammerless Serial Numbers
3. S&w Safety Hammerless Serial Numbers

This model is also called the 38 Safety Hammerless or Lemon Squeezer. This pistol is the 5th Model which was produced between 1907 to 1940, with 41500 produced. Serial number starts with 220000. This pistol's serial number is 231188. This pistol appears to be unfired with it's original box. It is blued with a 4 inch barrel. Locate either 'Smith & Wesson, Springfield, Massachusetts' or 'Smith & Wesson; Houlton, ME' stamped on the barrel. This identification proves that the handgun is an authentic Smith & Wesson pistol. Locate the serial number on the left side of the pistol's frame. Smith made two different kinds of 'break open' guns. 'Tip ups', of which the model 1 1/2 is one, and 'Top Breaks'. The difference is the 'top breaks' had the hinge on the bottom of the frame and it hung down like a double barrel shotgun, and the cylinder stayed on the gun, while the 'tip ups' has the hinge at the top of the frame, and the barrel swung up and on top of the frame, pointing back. Smith & Wesson New Departure Safety Hammerless I picked up this Safety Hammerless a couple months back, it's in.38 S & W. The serial number is 218XXX, which puts it in the end of the 4th issue but it has the integral front sight of the 5th issue, all the numbers match.

As was mentioned the last time we looked at a .38 Safety Hammerless on this blog ('way back in Sunday Smith #2), the commonly repeated origin story of these handguns is probably largely hooey.
Gun shop mythology has D.B. Wesson hearing a tale of tragedy, this time of a young girl getting ahold of daddy's revolver and managing to shoot herself after cocking the hammer. Thus motivated, he sat up that night until the design of the Safety Hammerless sprang fully formed, Athena-like, from his furrowed brow.
In reality, regardless of the actual impetus behind the design, the revolver itself was one of the younger Joe Wesson's first projects at S&W, and passed through two iterations of drawings in 1882 and 1884 before appearing for sale in its final form in 1886.
The pictured revolver is the third iteration of the model. It had gone from a complex 'Z-bar' latch holding the frame closed to a simpler push-button one. The hammer was locked in place while the latch was being operated, which added redundancy to the grip safety.
Production of the Third Model started at s/n 42,484 in 1890 and ran through s/n 116,002 in 1898, putting the pictured revolver, with a serial number in the mid 60,000's, somewhere in the early half of that range. In the absence of a factory letter, I'll spitball it at 1893.
It was replaced by the Fourth Model, as seen in Sunday Smith #2, which had a sturdier and more easily operated, yet equally simple to manufacture, 'T-bar' toggle frame latch.
With seventy-some thousand built, the Third Model is the second most numerically common variant after the Fourth Model.
The thumb latch had to be pushed down to unlatch. It takes a while to get to where you can do this gracefully without trying to hold the gun shut with your thumb while your other hand is trying to open it. Note that the latch, as well as the spring in the topstrap, is blued on this nickel gun.
That little lip at the top of the square recess is the entirety of the locking surface holding the gun closed. Worn guns may pop right open when fired, which can be exciting.
The front sight on the Third Model, as on the First, Second, and Fourth Models, is pinned to the rib atop the barrel. The front sight on the Fifth Model was an integral part of the barrel.
While the trigger retains only vestiges of case coloring, the bluing on the trigger guard is still fairly nice. Looking to see if these areas are still in their original colors is a good first indicator of a re-nickel job. (See again the .38 Safety Hammerless Fourth Model in Sunday Smith #2). The mother-of-pearl grips are nice, but I do not believe them to be the factory stocks.

Smith & Wesson Hammerless 32

.

Accepted Forms of Payment

American Express, Discover, MasterCard, Money Order / Cashiers Check, Paypal, Personal Check, Visa, Wire Transfer

Smith And Wesson Safety Hammerless Serial Numbers

Shipping

S&w Safety Hammerless Serial Numbers

Shipments are sent via USPS Priority, USPS International Priority, FedEx and DHL (for most overseas shipments) or FedEx Ground at the auctioneer's option, signature is always required, unless other arrangements are made. Handling and shipping charges will be added to the invoice in one entry. Buyers should be aware that large, framed, fragile or odd shaped items can incur substantial shipping and packing charges. International shipments are invoiced by DIMENSIONAL weight, not the item weight. Please contact us for an estimate before bidding NOTE: Large, heavy or bulky items may not be shipped by the auctioneer - arrangements for shipping of these items via a third-party shipper may be arranged through the auction house. Customers who supply their own courier account number will still be charged a handling fee. Please allow 2-3 weeks for shipments after receipt of payment due to the high volume of packages being shipped.